Vaillant VRC 430f Installationshandbuch Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 40
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
Operating instructions VRC 430f 0020042470_014
Equipment properties
Application
The VRC 430f is a weather compensator controller for
heating and water heating.
"Weather compensator" means: the VRC 430f increas-
es its heating output at lower outside temperatures
and reduces its heating output at higher outside tem-
peratures. The outside temperature is measured by a
separate sensor, mounted outdoors, and the signal is
transmitted to the VRC 430f.
The room temperature depends only on your preset
values. The influence of the outside temperature
is compensated for.
You can use the VRC 430f to specify different room tar-
get temperatures according to the time and day.
In automatic mode, the VRC 430f controls your heating
based on these settings (see Fig. 0.1).
You can also define daily periods during which water is
heated using the VRC 430f.
04:00 16:0008:00 12:00
20:00
15 °
20 °
25 °
Room temperature
Time
Set back temperature
Period 1 Period 3Period 2
Fig. 0.1 Automatic heater operation: Setting the room target
temperature for different times of the day (example)
The VRC 430f can also be used to control the following
accessory components:
Circulation pump for the hot water generation in con-
junction with a multi-functional module VR 27
Conventional hot water cylinder
Vaillant layer cylinder actoSTOR
Second heating circuit using the Vaillant Mixer
Module VR 61
Solar system using the Vaillant Solar Module VR 68
The VRC 430f can be part of a new heating and water
heating installation or can be retrofitted in an existing
installation. The appliance must have an eBUS interface.
eBUS is a communication standard for data exchange
between the components of heating technology.
Product specifications
– eBUS interface
Wireless communication with a Vaillant appliance
Illuminated graphical display (display field)
Operation via both dials according to the "turn and
click" principle
Direct installation of the wireless receiver in the oper-
ating front of the heating unit or separate wall-mount-
ing option montage
The controller can be mounted separately on the wall
Equipped for operation with the Vaillant diagnosis
software vrDIALOG 810/2 and the Vaillant Internet
Communication System vrnetDIALOG, i.e. remote
diagnosis and remote adjustment
Equipment properties
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare